EasyManua.ls Logo

Philips QT4000 - Charging Procedure; Using the Appliance; Switching the Appliance On and Off

Philips QT4000
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Insert the small plug into the appliance.
3 Put the supply unit in the wall socket.
- The charging light on the supply unit lights up
green to indicate that the appliance is charging.
Note: The charging light on the supply unit does
not change color and does not go out when the
appliance is fully charged.
4 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
Optimizing the lifetime of the rechargeable
battery
When you have charged the appliance for the first
time, we advise you to use it until the battery is
completely empty. Continue to use the appliance
until the motor almost stops running during a
session. Then recharge the battery. Follow this
procedure at least twice a year.
Using the appliance
Always comb the beard and/or moustache with a
fine comb before you start trimming.
Be careful when you trim for the first time.
Do not move the trimmer too fast. Make
smooth and gentle movements.
Switching the appliance on and off
1 To switch on the appliance, slide the on/off
button up.
9
English

Other manuals for Philips QT4000

Related product manuals