Philips REMstar Pro C-Flex+ - Page 16

14 User Manual
al e r t au D i b l e
in D i c a t o r
Vi s u a l
in D i c a t o r
De V i c e a c t i o n po s s i b l e
ca u s e
pa t i e n t a c t i o n
Heated Tube Error none Humidier LED
icon will slowly
ash orange for
30 seconds then
return to solid
blue.
Alert present for
30 seconds or until
condition is xed.
Tubing may be
overheating or
malfunctioning.
Alert is present for 30 seconds or
until the condition is xed. Turn off
airow and reconnect the heated
tubing to the humidier according
to the humidier instructions.
If the alert continues to occur,
contact your home care provider.
Instant Message single beep Home care
provider will
supply text to be
displayed.
Only displayed when
therapy is off.
Message from
the provider.
Your home care provider may
send an instant message. Contact
your home care provider with any
questions.
Patient Reminder single beep Screen displays
message from the
provider.
Only displayed when
therapy transitions
from on to off.
Alert present for
6 minutes or until
user acknowledges.
Message from
the provider.
Your home care provider may
set a patient reminder scheduled
to pop up at a particular time to
remind you to replace your mask,
change your lters, etc. “Check
your mask, a new one may be
available. Call your provider.” is the
default message. The provider may
change the message.
SD Card: Prescription
Accepted
single beep Screen displays
“SD card inserted,
prescription
accepted”.
Alert present for
30 seconds or until
user acknowledges.
n/a Card status can be checked in
Status menu.
SD Card: Prescription
Rejected
single beep
◊ ◊
Screen displays
“SD card inserted,
prescription
rejected”.
Alert present for
30 seconds or until
user acknowledges.
Prescription
missing or
incorrect.
Contact your home care provider
for correct prescription.
SD Card: Inserted
Incorrectly
• • ◊ ◊
Screen displays
“SD card inserted
incorrectly”.
Alert present until
action is taken.
SD card
inserted
incorrectly.
Alert is present until card is
removed. Remove SD card and
reinsert correctly. If the alert
continues to occur, contact your
home care provider.
SD Card: Full
• • ◊ ◊
Screen displays
“SD card full”.
Alert present until
action is taken.
SD card is full. Alert is present until card is
removed. Remove SD card and
replace. Card status can be
checked in the Status menu from
the Info screen. Refer to “Using
the SD Card” in the “Accessories”
section of this manual for more
information about the SD card.
SD Card: Remove single beep
◊ ◊
Screen displays
“SD card
removed”.
Alert present for
30 seconds or until
user acknowledges.
SD card has
been removed.
No action needed.
SD Card: Data
Activity
single beep Screen displays
“Data activity: Do
not remove card”.
Alert present for
30 seconds or until
user acknowledges
or data activity
complete.
n/a No action needed. Refer to “Using
the SD Card” in the “Accessories”
section of this manual for more
information about the SD card.