Philips REMstar Pro - System Components; Included Items List; System Overview; Device Functionality

4 User Manual
System Contents
Your REMstar Pro C-Flex+ system includes the following items:
• Device • Reusable gray foam lter
• User manual • Disposable ultra-ne lter (optional)
• Carrying case • Side cover panel
• Power cord and power supply (Part # 1058190) • SD card
• Flexible tubing, 22 mm (optional 15 mm tubing is also available) • Humidier (optional)
Note: If any of these items are missing, contact your home care provider.
System Overview
The REMstar Pro C-Flex+ is a CPAP (Continuous Positive Airway Pressure) device designed for the treatment of
Obstructive Sleep Apnea (OSA). CPAP maintains a constant level of pressure throughout the breathing cycle.
When prescribed for you, the device provides several special features to help make your therapy more comfortable.
The ramp function allows you to lower the pressure when you are trying to fall asleep. The air pressure will gradually
increase until your prescription pressure is reached. You also have the option of not using the ramp feature at all.
Additionally, the C-Flex and C-Flex+ comfort features provide you with pressure relief when you exhale during
therapy.
Several accessories are also available for use with your REMstar Pro device. Contact your home care provider to
purchase any accessories not included with your system.
Air Outlet Port
Power Inlet
Filter Area
SD Card (Accessory) Slot
Side Cover
T a b
SD Card Cover
This gure illustrates some of the device features, described in the following table.
De v i c e fe a t u r e De S c r i p t i o n
Air Outlet Port
(conical, 22 mm)
Connect the exible tubing here.
SD Card (Accessory) Slot If applicable, insert the optional accessory SD card here.
SD Card Cover If applicable, the optional accessories such as a Link Module or Modem can be installed here.
Refer to the instructions supplied with the accessory. When not using an accessory, this
cover must be in place on the device.
Power Inlet Connect the power cord here.
Filter Area A reusable, gray foam lter must be placed in the lter area to screen out normal household
dust and pollens. A white ultra-ne lter can also be used for more complete ltration of very
ne particles.
Side Cover If using a humidier with the device, this side cover can be easily removed with the release
tab before attaching the humidier. Refer to the humidier manual. When not using a
humidier, this cover must be in place on the device.