Philips Respironics Wisp Youth User Manual

1
Instructions for Use
Wisp Nasal Mask
Intended Use
The Wisp Youth Nasal Mask is intended to provide an interface for application of CPAP or bi-level
therapy to patients. The mask is for single patient use in the home or multi-patient use in the hospital/
institutional environment. The mask is to be used on patients 7 years or older (>40 lbs/18kg) for whom
CPAP or bi-level therapy has been prescribed.
The Wisp Nasal Mask is intended to provide an interface for application of CPAP or bi-level therapy to
patients. The mask is for single patient use in the home or multi-patient use in the hospital/institutional
environment. The mask is to be used on patients (>66lbs/30kg) for whom CPAP or bi-level therapy has
been prescribed.
Notes:
• Exhalation is built into this mask so a separate exhalation device is not required.
• This mask is not made with natural rubber latex or DEHP.
Caution: U.S. Federal law restricts this device to sale by or on the order of a physician.
Symbols
Warning or Caution
Note
Tip
Not Made with Natural Rubber Latex
X1
System One Resistance Control
Warnings
• This mask is not suitable for providing life support ventilation.
• Hand wash prior to use. Inspect the mask for damage or wear (cracking, crazing, tears, etc). Discard and
replace any components as necessary.
• Some users may experience skin redness, irritation, or discomfort. If this happens, discontinue use and
contact your healthcare professional.
• Consult a physician or dentist if you encounter tooth, gum, or jaw soreness. Use of a mask may
aggravate an existing dental condition.
• Consult a physician if you experience the following symptoms while using the mask or after removing
it: Drying of the eyes, eye pain, eye infections, or blurred vision. Consult an ophthalmologist if
symptoms persist.
• The mask material should be away from your eyes.
• Do not block or seal o the exhalation ports.
• Do not overtighten the headgear straps. Watch for signs of overtightening, such as excessive
redness, sores, or bulging skin around the edges of the mask. Loosen the headgear straps to alleviate
symptoms.
• This mask is designed for use with CPAP or bi-level systems recommended by your health care
professional or respiratory therapist. Do not wear this mask unless the CPAP or bi-level system is
turned on and operating properly. Do not block or try to seal the exhalation port.
Explanation of
the Warning:
CPAP systems are intended to be used with special masks with connectors which have
vent holes to allow continuous ow of air out of the mask. When the CPAP machine is turned on and
functioning properly, new air from the CPAP machine ushes the exhaled air out through the attached

Philips Respironics Wisp Youth Specifications

General

Brand	Philips
Model	Respironics Wisp Youth
Category	Respiratory Product
Language	English

Summary

Intended Use

Purpose and Patient Criteria

Specifies the mask's use for CPAP/bi-level therapy and patient age/weight requirements.

Notes

Highlights built-in exhalation and material composition (no latex/DEHP).

Physician Order Requirement

States U.S. federal law restricts sale by or on order of a physician.

Safety Information

General Warnings

Covers suitability for life support, cleaning, irritation, dental issues, eye care, port blocking, and headgear tension.

Operational Warnings

Details warnings related to CPAP/bi-level system operation, oxygen use, and potential rebreathing.

Product Features

Usage and Maintenance

Pre-Use and Cleaning Instructions

Instructions for hand washing the mask, face, and cleaning fabric/non-fabric parts with detergent.

Cleaning Cautions

Prohibits use of bleach, alcohol, or solutions with conditioners/moisturizers.

Institutional Disinfection

Refers to a separate guide for multi-patient use in healthcare settings.

Achieving Proper Fit

Mask Sizing and Initial Fit

Guidance on selecting the correct cushion size and initial mask placement.

Putting On and Adjusting

Step-by-step instructions for wearing, securing, and adjusting the headgear for a comfortable fit.

Tube Management and Usage

Optional tube management and instructions for connecting the mask and operating the therapy device.

Comfort Tips and Removal

Advice on avoiding overtightening headgear and proper mask removal.

Disassembly and Assembly

Component Removal and Attachment

Instructions for removing and attaching the elbow, tubing, cushion, and headgear.

System One Resistance Control

Explains the mask's compatibility and setting for Philips Respironics System One devices.

Technical Specifications

Pressure Flow and Resistance

Details the mask's flow rate vs. pressure and resistance drop.

Deadspace, Sound, Disposal, Storage

Provides deadspace volumes, sound levels, disposal, and storage condition guidelines.

Limited Warranty