Cleaning the shaving unit in the Jet Clean System
(RQ1285, RQ1260/21, RQ1250/21 only)
The Jet Clean System comes in two types:
- Type RQ1008 has three cleaning programs: the eco
program, the auto program and the intensive program.
Press the up/down button to select the cleaning
program you prefer.
Note: The eco program has a shorter drying time, to save energy.
The intensive program is a more thorough cleaning program.
- Type RQ1007 has one automatic cleaning program. When
you press the on/off button, the Jet Clean System starts
cleaning in the automatic cleaning program.
Preparing the Jet Clean System for use
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
, The holder automatically moves to the highest position.
3 Simultaneously press the release buttons on both sides
of the cleaning chamber (1). Then lift the Jet Clean
System off the cleaning chamber (2).
, The cleaning chamber remains behind.
4
level between the two lines.
ENGLISH 53
To Next Page
