Philips S9711/31 - Storage and Replacement; Shaving Head Replacement; Replacement Reminder Reset

Storage
1 Store the appliance in the pouch supplied.
Note: Make sure the appliance is dry before you
store it in the pouch.
Replacement
Replacing the shaving heads
2yrs
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
Replace damaged shaving heads immediately.
Always replace the shaving heads with original
Philips shaving heads (see 'Ordering accessories').
Replacement reminder
The replacement reminder indicates that the
shaving heads need to be replaced.The shaving
unit symbol lights up continuously, the arrows
flash white and you hear a beep when you switch
off the shaver.
1 Switch off the appliance.
2 Pull the shaving head holder off the bottom
part of the shaving unit.
1
3
2
3 Place the retaining ring holder on the retaining
ring (1), turn it anticlockwise (2) and lift it off the
shaving head (3).
Remove the retaining ring from the retaining
ring holder and repeat this process for the other
retaining rings.
28
English