To Next PageTo Next Page
Need help?Do you have a question about the Philips Selecon SPX 15-35 and is the answer not in the manual?
Crucial safety advice covering hot surfaces, double insulation, electrical isolation, fire risks, and environmental use.
Guidelines for heat management, tilt lock, handles, rigging checks, and electrical isolation before maintenance.
Proper methods for mounting, including safety bonds, orientation, and attaching to scaffold pipes.
Details on fitting pattern holders, irises, and other accessories into front and rear slots.
Initial familiarization, pattern holder use, shutter lock, and procedure for lamp replacement.
Steps for centering the lamp and adjusting the beam for 'peak' or 'flat' light output.
Instructions for pan/tilt, focusing zoomspot and fixed beam models, and operating the shutter system.
Procedures for changing lens tubes and details on colour filter life based on lens tube type.
Procedures for Class 2 appliance testing, including visual checks and insulation resistance.
Step-by-step guides for cleaning the reflector and the lens.
Lists suitable lamp types, voltages, and their typical hour ratings for the SPX range.
Explains warranty terms, conditions for voiding, claims process, and liability limitations.
Provides order codes for accessories and contact details for global support centers.
Crucial safety advice covering hot surfaces, double insulation, electrical isolation, fire risks, and environmental use.
Guidelines for heat management, tilt lock, handles, rigging checks, and electrical isolation before maintenance.
Proper methods for mounting, including safety bonds, orientation, and attaching to scaffold pipes.
Details on fitting pattern holders, irises, and other accessories into front and rear slots.
Initial familiarization, pattern holder use, shutter lock, and procedure for lamp replacement.
Steps for centering the lamp and adjusting the beam for 'peak' or 'flat' light output.
Instructions for pan/tilt, focusing zoomspot and fixed beam models, and operating the shutter system.
Procedures for changing lens tubes and details on colour filter life based on lens tube type.
Procedures for Class 2 appliance testing, including visual checks and insulation resistance.
Step-by-step guides for cleaning the reflector and the lens.
Lists suitable lamp types, voltages, and their typical hour ratings for the SPX range.
Explains warranty terms, conditions for voiding, claims process, and liability limitations.
Provides order codes for accessories and contact details for global support centers.
General| Beam Angle | 15-35 degrees |
|---|---|
| Lamp Type | HPL |
| Finish | Black |
| Color Temperature | 3200K |
| CRI | 100 |
| Type | Profile |
| Weight | 12 kg |
