Philips Senseo Twist HD7870/80 User Manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Service Manual
Philips Consumer Lifestyle
Senseo Twist
HD7870/80
HD7870/81
13/02
PRODUCT INFORMATION
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
• Voltage : 220 - 240 V
• Frequency : 50 Hz
• Power consumption : 1450 W
• Standby power : 0.25 W
• Color setting : Chinese Fire
• Weight : 2,05 Kg
• Dimensions H x W x D
- Appliance : 31,5 x 24,9 x 30,8 cm
- F-Box : 36 x 29 x 29,5 cm
• Length of cord : 80 cm
• Contents water reservoir : 930 cc (ml)
ACCESSORIES
• CRP475/01 1-cup pod holder Black
• HD5015/01 2-cup pod holder Black
• CRP862/01 Drip tray cover Black
• CRP872/01 Collector
• CRP864/01 Water container small
• CRP869/01 Water container lid Deep Black
OPTIONAL (accessories)
• CRP865/01 Water container big (incl. bucket, optional
Britta Filter to be purchased separately)
• CRP866/01 Water container lid
(for Water container big)

Philips Senseo Twist HD7870/80 Specifications

General

Type	Coffee maker
Model	HD7870/80
Power	1450 W
Maximum Operating Pressure	15 bar
Cord Length	0.8 m
Voltage	220-240 V
Frequency	50-60 Hz
Number of Cups at Once	2
Auto Power Off	Yes
Auto Power Off After	30 minutes
Color	Black
Coffee Pod System	Senseo Pods
Brewing Time	Approx. 30 seconds

Summary

Technical Information

Volume Adjustment

Procedure for adjusting the coffee volume output using user controls.

Schematics Diagram

Disassembly and Re-assembly Advice

Back Cover Removal

Instructions for safely removing the appliance's back cover.

Brewhead Lid Cover Removal

Guidance on detaching the brewhead lid cover.

Boiler Removal

Steps for safely removing the boiler, including precautions.

Brewhead Assembly Removal

Procedure for detaching the complete brewhead assembly.

PCB Assembly Removal

Steps to remove the Printed Circuit Board assembly.

Base Appliance Component Access

Methods to access UI Panel, Pump, and Water container interface.

UI PCBA Access

Procedure to access the User Interface PCB.

Descaling Procedure

Repair Instructions

Service Mode Operation

How to enter and use the appliance's dedicated service mode.

Boiler Reset Procedure

Instructions for performing a boiler reset.

Settings Adjustment Overview

Overview of adjustable settings within the service mode.

Manual Pump Calibration

Calibrating the pump for accurate coffee volume output.

ME/HE Selection

Selecting Mid-End or High-End appliance version.

Country Selection

Setting the correct country version for appliance operation.

Sensor and LED Test Procedure

Procedure for testing sensors and LEDs for electrical correctness.

PCBA Replacement

Parts List

Exploded View Diagram