Philips SHB5500 - Using Your Headset; Connect to a Bluetooth Device; Manage Calls and Music

5EN
4 Use your
headset
Connect the headset to a
Bluetooth device
1 Turn on your mobile phone/Bluetooth
device.
2 Press and hold to turn the headset
on.
» TheblueLEDashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
• If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Note
• If the headset fails to connect to any Bluetooth device
within range in 5 minutes, it will switch off automatically
to save the battery life.
Manage your calls and music
Task Operation Sound
or LED
Indicator
Turn the
headset on.
Press and hold
for more
than 1 second
1 short
beep
Turn the
headset off.
Press and hold
for more
than 4 seconds
• 1 long
beep
• 1 long
white
ash
Play or pause
music.
Press
1 short
beep
Pickupor
terminate a
call.
Press
1 short
beep
Reject a call. Press and hold 1 short
beep
Redial the last
number.
Press
twice
1 short
beep
Switch caller in
a call.
Press
twice
1 long beep
Adjust volume. Press +/- 1 short
beep
Skipforward. Press and hold
+
1 short
beep
Skipbackward. Press and
hold -
1 short
beep
Other headset indicator status
Headset status Indicator
The headset is connected
to a Bluetooth device,
while the headset in
standby mode or while
you are listening to music.
The blue LED
ashesforevery
6 seconds.
The headset is ready for
pairing.
TheLEDashes
blue and white
alternately.
The headset is on but not
connected to a Bluetooth
device.
The blue LED
ashesquickly.
There is an incoming call. The blue LED
ashestwiceper
second.
The battery level is low. The white LED
ashes.
The battery is fully charged. The white LED
is off.