4
14.7.5 POWER-ON DELAY
This program is intended for battery
operated systems where, in order to conserve
battery power, the amplifier is switched on
only when a call is made.
It causes a time delay (selectable from 1-9
seconds) between pressing the Call Station
‘Press-To-Talk’ key, Microphone ‘on’ switch,
or switching on of a Control Input, and
actual activation of the call.
Relay 3 of the Control Relay Module is
dedicated to switching the power to the
amplifier(s), but if “0” seconds is selected,
relay 3 is free to be programmed for any
other function. (See program step 1.7.)
5.1 Main menu selection
Select from the main menu by means of the
left/right arrow keys: POWER-ON DELAY.
5.2 Delay time
The delay time can be selected with the up
and down arrow keys.
Pressing ENTER confirms the selection and
returns to the main menu.
Power-on Delay
SELECT PROGRAM :
POWER - ON - DELAY
POWER - ON - DELAY
ENTER SECONDS : X
1
2
5
Music Input Text
MUSIC INPUT TEXT
SELECT TEXT OF
MUSIC INPUT : X
SCROLL WITH
XXXXXX
SELECT PROGRAM :
1
2
3
6
GB/SM 30 user manual 5/26/98 10:18 AM Page 4
To Next Page
Loading...
