Philips SM30 - Flexible F-Keys Programming; Selection Call Station Number; Activation Flexible F-Key

11
15.2 Current mode display
The display will show the current mode.
15.3 Mode selection
Selection of the non-interruptable or
interruptable mode can be made using the
up/down arrow keys.
14.7.16 FLEXIBLE F-KEY
PROGRAMMING
This program step provides flexible
programming of the F-keys (F1, F2, F3 or
F4) of a Call Station.
After pressing the flexible programmed F-
key on the Call Station, the pre-
programmed zone selection can be
temporarily changed by means of the
numeric keypad on the Call Station.
Pressing the F-key next time, the originally
pre-programmed zones will be selected
again.
Example:
F1-key: flexibly programmed, pre-
programmed with message 1
routing to zones 1, 2 and 3.
F2-key: pre-programmed with message 2,
routing to zones 4, 5 and 6.
If the F1-key is pressed, the zone LEDs 1, 2
and 3 will light to indicate the pre-
programmed routing. If you want to route
message 1 to other zones, adding or deleting
of zone numbers is done by means of the
numeric keys. Pressing the ‘Press-To-Talk’
key will broadcast the message 1 to the
actually selected zones.
If the F2-key is pressed, the zone LEDs 4, 5
and 6 will light to indicate the pre-
programmed routing, but no additional
zone selection is possible. Pressing the
‘Press-To-Talk’ key will broadcast message 2
to zone 4, 5 and 6.
16.1 Main menu selection
Select from the main menu by means of the
left/right arrow keys:
FLEXIBLE KEYS
16.2 Selection Call Station number
Select the number of the Call Station by
means of the up/down arrow keys.
16.3 Activation flexible F-key
Activate the flexible function of an F-key by
means of the ‘|’ key. If necessary, deactivate
the flexible function by means of the ‘O’
key.
Flexible F-keys
CALL STATION : X
16
SELECT ITEM :
1
2
3
F L EX. F UNCT. 1000
CST X FKEYS: 1234
SELECT PROGRAM :
FLEXIBLE FKEYS
GB/SM 30 user manual 5/26/98 10:18 AM Page 11