The sensor shows a small dot on the left side
of the display to indicate that the adaptation
phase is active.
Vibration level
The sensor is smart and has a self-learning
algorithm. The sensor optimizes the vibration
level based on your reaction time (response
rate).
Vibration patterns
Every five days the vibration pattern changes
to make sure that you do not get used to the
vibrations and you will keep responding to
them.
Resetting the sensor
Reset the sensor if you want to remove your
data and reset the adaptation phase (e.g.
other user, a long period of disuse.
To reset the sensor, press and hold the
activation button for five seconds when the
sensor shows one of the data screens.
The sensor vibrates after two seconds, but
hold down the button until the sensor has
counted down from three to one and you feel
another vibration.
20
English
To Next Page
Loading...
