Philips SmartSleep - Sensor; Strap; Operating conditions

Length of detachable USB
cord
60cm (23.6in.)
Temperature ≤40°C (104°F) while operating
Sensor
Safety classification Class III device (sensor battery is
charged by a Class II adapter)
Dimensions Sensor (height
x width x Depth)
Approx. 79 x 43 x 13mm (3.1 x 1.7 x
0.5in.)
Weight Sensor Approx. 29gr (1oz.)
Ingress Protection marking IP51
Internal non-replaceable
battery
Lithium Polymer 3.7V, 300mAh,
UL1642
Strap
Material strap 42% Polyester, 40% Nylon, 18%
Spandex
Material hook / slider Coated steel
Length (min - max) Approx. (72cm - 130cm) / (28in.
- 51in.)
Weight Approx. 33gr (1.16oz.)
Operating conditions
Temperature +5°C to +40°C (41°F to 104°F)
Relative humidity 15% to 95% (no condensation)
Atmospheric pressure 86 - 106kPa
33
English