Intensity levels per mode
- Low: 1 LED indicator light.
- Medium: 2 LED indicator lights.
- High: 3 LED indicator lights.
Note: to adjust the intensity level to the next higher
or lower level, you can press the + button to increase
intensity or the - button to decrease intensity at any
time during the brushing cycle.
Pressure Sensor
A change in vibration (and a slight change in sound)
alerts you when you apply too much pressure while
brushing. See chapter ‘Features’.
Battery status (when handle is not on
charger)
- 1 yellow LED indicates a low charge.
- 3 green LEDs indicate a full charge.
Note: If you hear a long beep and the yellow LED of
the battery level indicator ashes, your Sonicare will
turn off until placed on the charger, where it will start
to recharge.
Note: To keep the battery fully charged at all times,
you may keep your Sonicare on the charger when not
in use.
ENGLISH 11
4235_020_9457_2_DFU-Luxury_A6_v1.indd 11 08/04/15 11:03
To Next Page
Loading...
