4 Remove the protective screen in front of
the UV light bulb.
To remove the screen, grasp the edges next to the
snaps, gently squeeze and pull out the protective
screen.
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of
the metal clasp.
6 Clean the protective screen and the UV light
bulb with a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the
light bulb with the metal clasp and push the bulb
into the clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen
with the slots on the reective surface near the UV
light bulb. Push the screen straight into the slots on
the sanitizer.
Storage
If you are not going to use the product for an
extended period of time, unplug it from the
electrical outlet, clean it and store it in a cool and
dry place away from direct sunlight.
Replacement
Brush head
Replace Sonicare brush heads every 3 months to
achieve optimal results. Only use genuine Philips
Sonicare replacement brush heads.
ENGLISH 17
4235_020_9457_2_DFU-Luxury_A6_v1.indd 17 08/04/15 11:03
To Next Page
Loading...
