Changing the intensity settings
Your Sonicare Toothbrush gives you the option to choose between 3 different intensity levels: low,
medium and high. Based on the brush head you attach, the intensity will be selected automatically. If
you wish to change to a different intensity, you can do so by pressing the mode/intensity button while
brushing.
Note: This feature works for Philips Sonicare DiamondClean Smart, ExpertClean, Expert Results,
Protective Clean 5100 and 6100 Series.
For toothbrushes with an Intensity Level Panel on the handle, press the intensity panel up or down to
adjust the intensity level. Check your user manual for more details.
How can I use the brushing guidance in the
Sonicare App?
Brushing guidance is a feature that is only available for DiamondClean Smart or FlexCare Platinum Connected
users. This feature guides you through your brushing experience to have the best results for your oral health.
The guidance starts on the top teeth on the right and ends at the bottom teeth on the right. The sections
activate in a set pattern. While brushing, the app can detect if you are brushing the outside of your teeth or
the inside of your teeth. It does this by detecting if the brush head is towards you or away from you. The
guidance is designed to promote an equal amount of brushing the inside and outside of each section.
Note: The Sonicare App does not locate your brushing position. It is a guided experience where the app
shows you where to brush.
To Next Page
Loading...
