Philips SP9871 - Travel Lock and Maintenance; Travel Lock; Cleaning Procedures

23
English
Activating the travel lock
1
Press the on/off button for 3 seconds to use the
travel lock mode.
3 sec.
While you activate the travel lock, the travel lock
symbol lights up briefly and the shaver produces a
short sound.When the travel lock is activated, the
travel lock symbol flashes.
If you try to switch on the shaver while the travel
lock is active, the travel lock symbol flashes.
Deactivating the travel lock
1
Press the on/off button for 3 seconds.
While you deactivate the travel lock, the travel lock
symbol lights up briefly and the shaver produces a
short sound.The shaver switches on and is now
ready for use again.
Note: The shaver unlocks automatically when it is
placed on the wireless Qi charging pad.
Cleaning and maintenance
Regular cleaning guarantees better shaving
results.
Never clean, remove or replace the shaving unit
while the shaver is switched on.
Do not apply pressure to shaving head guards.
Do not touch shaving heads with hard objects as
this may dent or damage the precision-made
slotted guards.
Do not use compressed air, abrasives, scourers or
aggressive liquids such as petrol or acetone to
clean the shaver.
Cleaning the shaver under the tap
Clean the shaver after every shave for optimal
performance.
Always check if the water is too hot, to prevent
burning your hands.