Philips SP9871 - Shaving Head Replacement; Replacing Shaving Heads; Replacement Reminder

29
English
2yrs
Always replace the shaving heads with original Philips
shaving heads (see 'Ordering accessories').
Replacement reminder
The replacement reminder indicates that the shaving
heads need to be replaced. The shaving unit symbol
lights up continuously, the arrows flash white and you
hear a beep when you switch the shaver on or off.
1
Switch off the shaver.
2
Press the release button on the shaving unit and
pull the shaving head holder off the shaving unit.
SH91
3
Remove the shaving heads from the shaving head
holder. Discard the used shaving heads
immediately to avoid mixing them with the new
shaving heads.
7 sec.
4
After replacing the shaving heads, you can reset
the replacement reminder by pressing the on/off
button for 7 seconds. Wait until your hear 3 beeps.
If you do not reset the replacement reminder, the
shaver resets automatically after 9 shaves.