6 EN
3 Turn the stand anti-clockwise 45 degrees
to the
position and lock it to the
Connect power
Note
When you position the PhotoFrame, ensure
that the power plug and outlet are easily
accessible.
1 Connect the supplied power adaptor to:
the DC socket of the PhotoFrame
the AC outlet
» A few seconds later, the PhotoFrame
turns on automatically.
3 Get started
Caution
Use the controls only as stated in this user
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand
attach the supplied stand to the back of the
PhotoFrame.
1 Insert the stand into the PhotoFrame.
2 Position the indication on the stand to
the
position.
To Next Page
Loading...
Need help?
General
