Philips SRP2018 User Manual

8 EN
4
When the device is off, immediately press and release OK to save
the code. The red LED indicator will turn off.
max. 20
minutes
5
Operate the device with the universal remote. If your device
responds correctly, it means you have saved the right code.
Note
•
Auto registration can be reversed, by pressing and releasing once more during the
auto registration process. This is helpful if you missed out the chance to press OK
within 2 seconds. Make sure that the device is rst powered on again.
• Repeat the same procedures to set up other devices.
• It is possible sometimes that your device only responds to some of the buttons. In
such case, set up with the next code in the code list, and try operating your device
again.

Philips SRP2018 Specifications

General

Interface	IR Wireless
Input type	Press buttons
Product color	Black
Backlight buttons	No
Brand compatibility	Any brand
Customizable buttons	Yes
Remote control proper use	DVD/Blu-ray, DVR, SAT, TV, VCR
Maximum range	10 m
Number of devices supported	8
Number of brands in database	> 800
Battery type	AAA
Battery technology	Alkaline
Package type	Blister
Package weight	215 g

Weight and Dimensions

Weight	53 g