Philips SRP2018 User Manual

English
EN 11
4 Service and support
Frequently asked questions
My universal remote does not work at all.
• Check if you have correctly setup the device with the right code.
• Check if you have pressed the corresponding device key for your
device.
• Check if the batteries are inserted properly. If the battery level is
low, replace the batteries.
• Check if your device is powered on.
If several device codes are listed under the brand of my device, how
can I select the correct device code?
To seek the correct device code, test the codes one by one. The codes
are sorted by popularity, and the most popular code is listed rst.
My device responds only to some of the commands.
You have set a code for which only some commands work properly
but some do not. Try other codes until most keys work properly.
Need help?
We advise you to rst read this user manual carefully. It helps you set
up and use the universal remote.
If, however, you require extra information or have additional questions
about setup, usage, warranty, etc of the SRP2018, you can always
contact us.
When calling our helpline, make sure to have the SRP2018 at hand
when you call, so that our operators can help you determine whether
SRP2018 is working properly.
You will nd our contact details at the end of this user manual.
For online support, visit www.philips.com/support

Philips SRP2018 Specifications

General

Interface	IR Wireless
Input type	Press buttons
Product color	Black
Backlight buttons	No
Brand compatibility	Any brand
Customizable buttons	Yes
Remote control proper use	DVD/Blu-ray, DVR, SAT, TV, VCR
Maximum range	10 m
Number of devices supported	8
Number of brands in database	> 800
Battery type	AAA
Battery technology	Alkaline
Package type	Blister
Package weight	215 g

Weight and Dimensions

Weight	53 g