Philips SRP8121G/27 - Programming Your Remote; Direct Code Entry Method

6
Programming Your Remote
Your remote is designed to control multiple
audio/video devices. To use, you will need to
program the remote for your devices. There are
two dierent methods you can use to program
the remote, Direct Code Entry or Auto Code
Search.
• The Direct Code Entry method is the
recommended approach, as it is the simplest
and quickest process in most cases.
• The Auto Code Search method searches
through all the codes in the remote to nd a
code for your device.
NOTE: This remote comes preprogrammed for
Roku
®
boxes and Samsung TVs. Press tv for
Samsung TVs and strm for Roku boxes.
Direct Code Entry (Recommended)
1. Locate the Code List included
with your remote. Find the section
for the type of device you wish
to control, (for example tv, strm,
aud, etc). Locate the brand of your
device and circle all the remote
codes for the brand.
2. Press and hold down the Setup
button on the remote until the red
light on the remote control turns
on. Release the Setup button.
The red light will remain on.
NOTE: The red light will either be a
small light at the top of the remote or
the power ON/OFF button.
3. Press and release the device button
on the remote for the type of device
you wish to control, (for example
tv, strm, aud, etc). The red light will
blink once and remain on.
NOTE: Any of the device buttons
on the remote can be programmed
to control any of your devices. For
example, you can use the aux device
button on the remote to control a
satellite receiver, digital converter
box, streaming media player or any
device category in the Code List.
1
2
3
4
5
6
7
8
9
0
ENTER
INPUT
Sleep
Setup
APPS
MENU
ch
OK
CH–
CH+
VOL–
VOL+
1
2
3
4
5
6
7
8
9
0
ENTER
INPUT
Sleep Setup
APPS
MENU
ch
OK
CH–
CH+
VOL–
VOL+
SRP8121G_27 EnSp manual v1.indd 6SRP8121G_27 EnSp manual v1.indd 6 5/24/21 6:21 PM5/24/21 6:21 PM