Philips T260XW03V3 - 4.4.2 Inverter Board; Disassembly; Figure 4-21 Remove Inverter cover; Figure 4-22 Remove Inverter connectors

Mechanical Instructions
EN 11LCD AUO 2k8 4.
4.4.2 Inverter Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws, and remove the cover.
Figure 4-21 Remove Inverter cover
3. Unplug the lamp connectors on the inverter. Start at the
top, and be careful not to pull and drag the wires. The use
of a pair of pliers can be helpful.
Figure 4-22 Remove Inverter connectors
4. Remove the Inverter board as shown in figure below.
Figure 4-23 Remove Inverter board
Reassembly
To reassemble, perform all processes in reverse order.
I_17791_005.eps
020408
I_17791_006.eps
020408
I_17791_007.eps
020408