Mechanical Instructions
EN 14 LCD AUO 2k84.
4.7 Model T370XW02V9
4.7.1 Control Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Control board.
Figure 4-32 Control board location
2. Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
Figure 4-33 Cover screws removal
3. Open the cover: notice that the cover cannot be removed.
Figure 4-34 Cover removal
4. Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-35 Unplug FPCs
5. You now can remove the Control Board.
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the black (or
sometimes white) line must follow the edge of the connector
(see figure below).
Figure 4-36 Correct FPC insertion
4.7.2 Inverter Board
These displays have the Inverter Board located on the PSU.
This is a so-called IPB (Integrated Power Board).
I_17791_012.eps
020408
I_17791_013.eps
020408
I_17791_014.eps
020408
I_17791_015.eps
020408
I_17790_006.eps
210308
To Next Page
Loading...
