EasyManua.ls Logo

Philips TAB8805 - Page 23

Philips TAB8805
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
23
I can’t find the Bluetooth name of this unit on
my Bluetooth device
Ensure the Bluetooth function is activated
on your Bluetooth device.
Re-pair the unit with your Bluetooth device.
Wi-Fi
Wi-Fi Connection cannot be established.
Check the availability of WLAN network on
the router.
Place the Wi-Fi router closer to the unit.
Make sure the password is correct.
Check the WLAN function or reboot the
modem and Wi-Fi router.
Dolby Atmos
Cannot achieve outstanding Dolby Atmos
eects.
For non-HDMI connections (such as use
of USB, Bluetooth, OPTICAL or AUDIO
IN), limited height surround eects are
generated. See the section of ‘Dolby Atmos’
about how to achieve best Dolby Atmos
eects.
Play-Fi
Cannot discover the Play-Fi supported devices
from the app.
Make sure the device is connected to the
Wi-Fi.
Cannot play Play-Fi music.
Certain network service or contents
available through the device may not be
accessible in case the service provider
terminates its service.
When the first time set up is not successful,
close the Philips Sound app powered by
DTS Play-Fi. Restart the app.
When the speaker was set as Stereo Pairs
or Surround Sound, the speaker need to
be disconnected in the App before use
separately.
Remote control does not work
Before you press any playback control
button, first select the correct source.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/-)
aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
This is a 15 mins power o
function, one of the ERPII standard
requirement for saving power
When the unit’s external input signal
level is too low, the unit will be turned o
automatically in 15 minutes. Please increase
the volume level of your external device.
The subwoofer is idle or the indicator
of subwoofer do not light up
Please unplug power cord from the mains
sockect, and plug it in again after 3 minutes
to reset the subwoofer.

Related product manuals