How to fix no sound from Philips TAB8907 soundbar?
If there is no sound coming from the soundbar speaker of your Philips Speaker System, try the following: * Connect the audio cable from your soundbar to your TV or other devices. * Select the correct audio input on the remote control. * Make sure that the soundbar is not muted. * Reset this product to its factory settings.
How to fix no power on Philips TAB8907?
If your Philips Speaker System has no power, check the following: * Ensure that the AC cord is properly connected. * Ensure that there is power at the AC outlet. * Press the button on the remote control or soundbar to turn the soundbar on.
Why is my Philips TAB8907 remote control not working?
If the remote control for your Philips Speaker System is not working, try these steps: * First select the correct source before pressing any playback control button. * Reduce the distance between the remote control and the unit. * Ensure the battery is inserted with correct polarities (+/-) as indicated. * Replace the battery. * Aim the remote control directly at the sensor on the front of the unit.
Why can't my device connect to the Philips TAB8907 soundbar?
If a device cannot connect with the soundbar of your Philips Speaker System, it may be due to the following reasons: * The device does not support the compatible profiles required for the soundbar. * You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. * The device is not correctly connected. Connect the device correctly. * The soundbar is already connected with another Bluetooth device. Disconnect the connected device, and then try again.
How to fix Philips Speaker System when buttons on main unit do not work?
If the buttons on the main unit of your Philips Speaker System do not work, disconnect it from the power supply for a few minutes, and then connect again.
What to do if Wi-Fi connection cannot be established on Philips TAB8907 Speaker System?
If a Wi-Fi connection cannot be established for your Philips Speaker System, try the following: * Check the availability of WLAN network on the router. * Place the Wi-Fi router closer to the unit. * Make sure the password is correct. * Check the WLAN function or reboot the modem and Wi-Fi router.
How to synchronize audio and video on Philips TAB8907?
If the audio and video are not synchronized on your Philips Speaker System, press the button to synchronize the audio with the video.
Why is the Bluetooth audio quality poor on my Philips TAB8907?
If the audio quality from a connected Bluetooth device is poor on your Philips Speaker System, move the device closer to the soundbar, or remove any obstacle between the device and the soundbar.
Why can't I find the Bluetooth name of Philips TAB8907 on my device?
If you cannot find the Bluetooth name of your Philips Speaker System unit on your Bluetooth device: * Ensure the Bluetooth function is activated on your Bluetooth device. * Re-pair the unit with your Bluetooth device.
What to do if the Philips TAB8907 Speaker System subwoofer is idle?
If the subwoofer is idle or the indicator of the subwoofer does not light up on your Philips Speaker System, unplug the power cord from the mains socket, and plug it in again after 3 minutes to reset the subwoofer.
General| Subwoofer type | Active subwoofer |
|---|---|
| Subwoofer included | Yes |
| Subwoofer connectivity | Wireless |
| Subwoofer frequency range | 35 - 150 Hz |
| Audio decoders | Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD |
| RMS rated power | 720 W |
| Audio output channels | 3.1.2 channels |
| Number of woofer drivers | 1 |
| Number of tweeter drivers | 2 |
| Woofer diameter (imperial) | 6.5 \ |
| Total Harmonic Distortion (THD) | 10 % |
| EasyLink | HDMI-CEC |
| Width (cm) outer carton | 60 cm |
| Height (cm) outer carton | 25 cm |
| Length (cm) outer carton | 109 cm |
| Net weight of outer carton | 18 kg |
| Gross weight of outer carton | 26.2 kg |
| Bluetooth profiles | A2DP, AVRCP |
| Soundbar impedance | 8 Ω |
| Soundbar frequency range | 150 - 20000 Hz |
| HDCP version | 1.4/2.3 |
| Wi-Fi frequency | 5 GHz |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Bluetooth version | 5.3 |
| Connectivity technology | Wired & Wireless |
| Display type | LED |
| Product color | Black |
| Audio formats supported | AAC, AIFF, FLAC, LPCM, M4A, MP3, SBC, WAV |
| High Dynamic Range (HDR) technology | High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG) |
| Cables included | AC |
| Number of products included | 1 pc(s) |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Package depth | 450 mm |
| Package width | 1050 mm |
| Package height | 225 mm |
| Package weight | 9000 g |
Weight and Dimensions| Depth | 106 mm |
|---|---|
| Width | 940 mm |
| Height | 65 mm |
| Soundbar weight | 3000 g |
| Subwoofer depth | 410 mm |
| Subwoofer width | 190 mm |
| Subwoofer height | 309 mm |
| Subwoofer weight | 6000 g |
Covers general safety advice and explains key safety symbols used in the manual.
Details hazards related to electric shock, short circuits, and fire risks.
Addresses risks of physical injury and damage to the product.
Guidance on cleaning the product and environmentally responsible disposal of old units and batteries.
Covers risks associated with overheating and potential contamination from batteries.
Details compliance with FCC and IC regulations, including specific notices and warnings.
Lists all items included in the soundbar package for user verification.
Provides an overview of the soundbar's physical features and controls.
Details the function of each button and LED indicator on the soundbar unit.
Illustrates and describes all available input/output connectors on the soundbar.
Provides an overview of the wireless subwoofer, including its connections and indicator.
Details the function of each button on the remote control and its power state indicator.
Explains the function of each button on the remote control, including navigation and special functions.
Provides instructions on how to open the remote and replace the batteries.
Offers recommendations for optimal placement of the subwoofer for best performance.
Step-by-step guide for securely mounting the soundbar to the wall.
Specifies screw dimensions and recommended mounting height for safe installation.
Explains how to set up and use Dolby Atmos for immersive audio experiences.
Details how to connect the soundbar to a TV using HDMI ARC/eARC for optimal audio.
Instructions for connecting the soundbar to a TV using a standard HDMI connection.
Guidance on connecting the soundbar to a TV or device via an optical audio cable.
Instructions for connecting the soundbar using 3.5mm or RCA audio cables.
Details how to connect the soundbar and subwoofer to the power supply.
Explains how to automatically pair the subwoofer, and manual steps if needed.
Guides users on downloading and installing the required app for Wi-Fi connectivity.
Steps to connect the soundbar to your Wi-Fi network using a mobile device.
Details how to confirm successful Wi-Fi connection and manage device names.
Steps to configure surround sound settings using the Play-Fi system.
Essential checks and preparations before using the soundbar for audio playback.
Explains how to power the soundbar on, off, and its standby modes.
Steps to connect a Bluetooth device and play music through the soundbar.
How to disconnect current Bluetooth devices and enter pairing mode.
Steps to connect a USB device and play audio files like MP3, WAV, FLAC.
Details on Bluetooth profiles, version, frequency bands, and wireless standards.
Lists supported Wi-Fi standards and their respective frequency bands and power.
Technical details of the soundbar including power, dimensions, and impedance.
Technical details of the subwoofer including power, dimensions, and impedance.
Information on USB direct version, power, and supported audio file formats.
Details on the remote control's distance, angle, and battery type.
Solutions for problems with the soundbar's main unit buttons and power.
Troubleshooting steps for no sound, distorted sound, or audio/video sync problems.
Steps to resolve issues where the wireless subwoofer is not producing sound.
Troubleshooting for devices failing to connect via Bluetooth to the soundbar.
Tips for improving poor audio quality when streaming via Bluetooth.
Steps to ensure the soundbar's Bluetooth name is discoverable on devices.
Solutions for establishing or maintaining a stable Wi-Fi connection.
Explains limitations of Dolby Atmos effects with non-HDMI connections.
Troubleshooting steps for when Play-fi devices cannot be discovered by the app.
Common issues and solutions for the remote control not working.
Information on the 15-minute power-off function for energy saving.
Steps to take if the subwoofer is idle or its indicator light is not on.
To Next Page
