How to fix no sound from Philips Speaker System soundbar?
If there is no sound coming from the soundbar speaker of your Philips Speaker System, try the following: * Connect the audio cable from your soundbar to your TV or other devices. * Select the correct audio input on the remote control. * Make sure that the soundbar is not muted. * Reset this product to its factory settings.
How to improve Philips Radio reception?
If your Philips Radio isn't getting a good signal, try these steps: * Keep the radio away from other electronic devices that might cause interference. * Fully extend and adjust the position of the radio antenna. * If you are using Wi-Fi, check the network connection and rotate or adjust the position of the Wi-Fi antenna.
Why do some Philips Radio stations not work sometimes?
Some stations can only support a limited number of listeners. If some stations do not work on your Philips Radio, try again after a few minutes. Also, the station may not be broadcasting at the moment, so try again later.
Why do some Philips Radio stations disappear from the list?
When a station stops broadcasting on the Internet, it will be removed from the list on your Philips Radio. The radio will check constantly if the station is on the air. If it restarts broadcasting, it will be brought back to the station list.
How to fix no power on Philips TAB8947?
If your Philips Speaker System has no power, check the following: * Ensure that the AC cord is properly connected. * Ensure that there is power at the AC outlet. * Press the button on the remote control or soundbar to turn the soundbar on.
Why is my Philips Speaker System remote control not working?
If the remote control for your Philips Speaker System is not working, try these steps: * First select the correct source before pressing any playback control button. * Reduce the distance between the remote control and the unit. * Ensure the battery is inserted with correct polarities (+/-) as indicated. * Replace the battery. * Aim the remote control directly at the sensor on the front of the unit.
Why can't my device connect to the Philips Speaker System soundbar?
If a device cannot connect with the soundbar of your Philips Speaker System, it may be due to the following reasons: * The device does not support the compatible profiles required for the soundbar. * You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. * The device is not correctly connected. Connect the device correctly. * The soundbar is already connected with another Bluetooth device. Disconnect the connected device, and then try again.
How to fix Philips TAB8947 Speaker System when buttons on main unit do not work?
If the buttons on the main unit of your Philips Speaker System do not work, disconnect it from the power supply for a few minutes, and then connect again.
Why does my Philips Radio have no sound?
If your Philips Radio isn't producing any sound, here are a few things to try: * First, make sure the volume isn't set too low or muted. * If you're using the radio function, fully extend and adjust the position of the radio antenna. * Keep the radio away from other electronic devices to avoid interference. * For internet radio, check your Wi-Fi network connection and rotate/adjust the position of the Wi-Fi antenna. Also, verify the radio station is not buffering.
What to do if my Philips Radio is not responding?
If your Philips Radio isn't responding, try disconnecting and reconnecting the AC power plug, then turn the radio on again. Also, check to see if the radio is in standby mode; if it is, turn it on.
General| Brand | Philips |
|---|---|
| Model | TAB8947 |
| Category | Speaker System |
| Language | English |
To Next Page
