What to do if a device cannot connect with Philips TAB7908 soundbar?
If a device can't connect, it might not support the compatible profiles required for the soundbar. Ensure you've enabled the Bluetooth function on the device by checking its user manual. Make sure the device is correctly connected. Also, the soundbar might already be connected to another Bluetooth device; disconnect that device and try again.
What to do if there is no sound from Philips TAB7908 soundbar speaker?
If you're not getting any sound from your soundbar speaker, try these steps: First, connect the audio cable from the soundbar to your TV or other devices. Then, select the correct audio input on the remote control. Ensure the TV is running the latest software by checking its user manual. Also, ensure the soundbar has the latest software version by consulting Philips Consumer Care online or locally. Make sure the TV’s audio output is set to 'HDMI sound system' (or a similar brand-specific setting). If still no audio or the sound is distorted, switch to a different audio output format. Check another source like Bluetooth. Ensure the soundbar isn't muted. As a last resort, reset the product to its factory settings.
What to do if Philips TAB7908 Speaker System remote control does not work?
If your remote control isn't working, first select the correct source before pressing any playback control button. Try reducing the distance between the remote and the unit. Ensure the battery is inserted with the correct polarities (+/-). If that doesn't work, replace the battery. Also, make sure you're aiming the remote directly at the sensor on the front of the unit.
What to do if there is no power on my Philips TAB7908?
If your device has no power, make sure the AC cord is properly connected. Also, check if there is power at the AC outlet. Finally, press the power button on the remote control or soundbar to turn the soundbar on.
Why is there no sound from the wireless subwoofer of my Philips TAB7908?
If you're not getting any sound from the wireless subwoofer, try manually connecting it to the main unit. Increase the volume using the + (Volume Up) button on the remote or soundbar. If using a digital input, set the TV output to PCM. Try connecting directly to your Blu-ray player or other sources. Note that some TVs don't pass through digital audio, and your TV might be set to variable audio output; confirm it's set to FIXED or STANDARD. If using Bluetooth, ensure the volume on your source device is turned up and that the device isn't muted.
What to do if the buttons on Philips TAB7908 main unit do not work?
If the buttons on the main unit aren't working, disconnect the device from the power supply for a few minutes, then connect it again.
Why is the quality of audio play from a connected Bluetooth device poor on my Philips TAB7908?
If the audio quality from a connected Bluetooth device is poor, the Bluetooth reception might be weak. Try moving the device closer to the soundbar or removing any obstacles between them.
Why I can’t find the Bluetooth name of Philips TAB7908 on my Bluetooth device?
If you can't find the Bluetooth name of the unit on your device, ensure that the Bluetooth function is activated on your Bluetooth device. You may also need to re-pair the unit with your Bluetooth device.
What to do if the subwoofer is idle or the indicator of subwoofer does not light up on my Philips TAB7908 Speaker System?
To reset the subwoofer, unplug the power cord from the mains for a few minutes.
General| Brand | Philips |
|---|---|
| Model | TAB7908 |
| Category | Speaker System |
| Language | English |
To Next Page
