Philips TAB7908 - Listen to an External Device; Play Audio through USB

19EN
• When the rst Bluetooth device
pause or disconnected, the second
Bluetooth device can stream its
audio to soundbar.
• Incoming call has priority over music
playback regardless from rst or
second devices.
Listen to an external device
Ensure that the soundbar is connected to
the TV or audio device.
1 Press the button repeatedly on the
soundbar or on the remote control
to select the Audio in, Optical, HDMI
eARC/ARC, HDMI in mode.
2 Operate your audio device directly
for playback features.
3 Press the +/– (Volume) buttons to adjust
the volume to your desired level.
» When selecting a dierent audio
format, the soundbar will display
the following as follows:
Audio (abbreviation) Display
LPCM 2ch PCM
LPCM 5.1ch PCM
LPCM 7.1ch PCM
Dolby Digital
Dolby AUDIO
Dolby TrueHD Dolby AUDIO
Dolby Digital Plus Dolby AUDIO
Dolby Atmos -
Dolby TrueHD
Dolby Atmos
Dolby Atmos -
Dolby Digital Plus
Dolby Atmos
DTS Digital surround 5.1 DTS
Note
• The soundbar may not be able to decode all
digital audio formats from the input source. In this
case, the system will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set to
PCM or Dolby Digital (Refer to the user manual
of the input source device for its audio setting
details) with HDMI in / HDMI ARC / Optical input.
Play audio through USB
Enjoy audio on a USB storage device,
such as an MP3 player and USB ash
memory, etc.
1 Insert the USB device.
2 Press the button repeatedly on
the soundbar or on the remote
control to select the USB mode.
» USB is displayed on the display
panel.
3 During playback:
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
Note
• This product may not be compatible with
certain types of USB storage devices.
• If you use a USB extension cable, USB hub,
or USB multifunctional card reader, the USB
storage device may not be recognized.
• Do not remove the USB storage device while
reading les.
• The system can support USB devices with up to
128 GB of memory.
• This system can play MP3 / WAV / FLAC.
• Support a USB port: 5V 500mA.