Philips TAB8947 - Main Unit Connectors; Wireless Subwoofer

EN 9
Main unit Connectors
This section includes an overview of the
connectors available on your Soundbar.
1
USB
• Audio input from a USB storage
device.
• Upgrade software of this
product.
2
AUX
Audio input from, for example, an
MP3 player (3.5mm jack).
3
OPTICAL
Connect to an optical audio output
on the TV or a digital device.
4
(Wi-Fi Setup) button
• Trigger Wi-Fi setup.
• Press and hold the button for 5
seconds to active the Wps mode.
• Press and hold the button for 20
seconds to reset the Wi-Fi settings.
5
HDMI OUT (eARC/ARC)
Connect to the HDMI input on the
TV.
6
HDMI 1/ HDMI 2
Connect to the HDMI input on the
TV.
7
AC~ Socket
Connect to the power supply.
8
Wall bracket slot
Wireless subwoofer
This section includes an overview of the
Wireless subwoofer.
1
AC~ Socket
Connect to the power supply.
2
Pair button
Press and hold for 5 seconds to
enter the pairing mode for the
subwoofer.
3
Subwoofer indicator
Determine the status based on the
wireless subwoofer indicator.
LED State Status
Fast blink Subwoofer in pairing mode
Slow blink Pairing Failed
Constant on Connected / Pairing successful