3 Get started
Charge the battery
Before you use your headphones, place them in
the charging box and charge the battery for
two hours for optimum battery capacity and
lifetime.
Use only the original USB charging cable to
avoid any damage.
Finish your call before charging. Connecting the
Connect the supplied Type C charging
cable to:
• Type C charging slot on the headphones
and;
• The charger/USB port of a computer.
Normally, a full charge takes 2 hours.
Pair the headphones with
your mobile phone
Make sure that the headphones are
Before you use the headphones with your
with a mobile phone. A successful pairing
establishes a unique encrypted link
between the headphones and mobile
phone. The headphones store the last 4
devices in the memory. If you try to pair
more than 4 devices, the earliest paired
device is replaced by the new one.
LED turns white during charging
is fully charged.
Press and hold for 4 seconds until the
Make sure that the mobile phone is
turned on and its Bluetooth feature is
activated.
The following example shows you how to
pair the headphones with your mobile
phone.
Pair the headphones with the mobile
phone. For detailed information,
refer to the user manual of your
mobile phone.
Activate the Bluetooth feature of
your mobile phone, select
Philips TAN4207.
EN 5
Philips TAN4207
1
2
3
4
1
2
Enter the headphones' password
"0000" (four zeros) if prompted. For
those devices featuring Bluetooth
3.0 or higher, there is no need to
enter a password.
To Next Page
Loading...
