Philips TAN7506 - Technical Data

Other headphones indicator status
Headphones status
Indicator
The headphones
are connected
to a Bluetooth
device, while the
headphones in
standby mode
or while you are
listening to music.
The blue LED will
ash once every
5s.
The headphones
are ready for
pairing.
The LED ashes
blue and white
alternately.
The headphones
are on but not
connected to a
Bluetooth device.
The blue LED
ashes slowly
If no connection
can be made, the
headphones will
turn itself o within
5 minutes.
Low battery level. The white LED
ashes until it is
out of power
Battery is fully
charged.
White LED is o.
5 Technical data
Note
 Specications are subject to change without
notice.
Music time — ANC enabled with
Bluetooth: 15 hours | ANC disabled
with Bluetooth: 20 hours
Talk time — 20 hours
Standby time — ANC disabled with
Bluetooth: 150 hours
Charging time: 2 hours
Rechargeable lithium polymer battery
(200 mAh)
Bluetooth version: 5.0
Compatible Bluetooth proles:
• HFP (Hands-Free Prole-HFP)
• A2DP (Advanced Audio Distribu-
tion Prole)
• AVRCP (Audio Video Remote
Control Prole)
Supported audio codec: SBC
Frequency range: 20-20,000 Hz
(Bluetooth)
Transmitter power: < 10 dBm
Operating range: Up to 10 meters (33
feet)
Digital echo & noise reduction
Auto power o
USB-C port for charging
Supports SBC
Low battery warning: available
Water resistance: IP54