This document serves as the user manual for the Philips Portable Radio 2000 Series, model R2506. It provides essential information regarding the radio's safety, setup, operation, technical specifications, and troubleshooting.
Function Description
The Philips Portable Radio R2506 is a compact device designed for listening to FM and MW (Medium Wave) radio stations. It offers a straightforward user experience with analog tuning and volume control. The radio can be powered either by batteries for portability or via an AC power cord for stationary use. It also includes a headphone socket, allowing for private listening without disturbing others. The design emphasizes ease of use, making it suitable for a wide range of users.
Important Technical Specifications
Power:
- Battery Type: D SIZE (LR20)
- Battery Voltage: 1.5V
- Number of Batteries: 2
- AC Input: 220-240V, 50-60Hz
Tuner/Reception/Transmission:
- Tuner Bands:
- FM: 88 - 108 MHz
- MW: 530 - 1600 KHz
Sound:
- Sound System: Mono
- Volume Control: Rotary (analogue)
- Output Power: 300 mW RMS
Connectivity:
- Audio/Video Output: Headphones (3.5mm)
- Dimensions (W x H x D): 210 x 149 x 67 mm
- Weight (Main unit): 668.4 g
Usage Features
Getting Started:
- Battery Installation: The radio requires two 1.5V R20/UM1/D batteries (not provided). Users must ensure correct polarity (+/-) when inserting the batteries. A caution is provided against mixing battery types (e.g., alkaline with carbon zinc) and advises removing batteries if the unit is not used for a long time. Batteries should be disposed of properly due to chemical substances.
- Power Connection: Alternatively, the radio can be powered by connecting the supplied AC power cord to the AC MAINS jack on the unit and then to a wall outlet. Users are cautioned to ensure the power voltage matches the device's specifications and to pull the plug, not the cord, when disconnecting.
Listening to FM/MW Radio:
- Switching On/Off and Volume Adjustment: The Volume/On-off control serves a dual purpose: turning the set on and off, and adjusting the sound level. To switch off the radio, the control should be turned to "OFF."
- Band Selection: A dedicated band selector allows users to choose between FM and MW wavebands.
- Tuning to Stations: The TUNING control is used to fine-tune a specific radio station within the selected band.
- Antenna for Reception: For optimal FM reception, the telescopic antenna should be fully extended and adjusted. The manual advises keeping the portable radio away from other electronic devices to avoid radio interference.
- Headphone Connectivity: A 3.5mm headphone socket is available for private listening. When headphones are connected, the loudspeakers are automatically switched off.
Overview of the Portable Radio Components:
- Telescopic antenna: Improves FM reception.
- TUNING: Fine-tunes a station in FM/MW mode.
- Volume / On off: Switches the set on/off and adjusts the sound level.
- TONE: Selects NEWS or MUSIC mode.
- 3.5 mm headphones socket.
- Band selector: Selects the waveband (FM or MW).
- Battery compartment.
- AC IN: For 220-240V 50-60Hz power input.
Maintenance Features
Troubleshooting:
The manual includes a troubleshooting section to help users resolve common issues before seeking service.
- No Power:
- Verify the AC power plug is properly connected.
- Check if there is power at the AC outlet.
- If using batteries, ensure they are not dead and are inserted correctly.
- No Sound:
- Adjust the volume control.
- Check if headphones are connected; if so, disconnect them to enable loudspeaker output.
- Poor Radio Reception:
- Fully extend and adjust the position of the antenna for better reception.
Safety and Important Notices:
- General Safety Instructions: Users are advised to read and follow all instructions, heed warnings, and not block ventilation openings. The device should not be installed near heat sources. The power cord should be protected from being walked on or pinched. Only manufacturer-specified attachments/accessories should be used. The apparatus should be unplugged during lightning storms or when unused for long periods. Servicing should be referred to qualified personnel if the apparatus is damaged in any way (e.g., damaged power cord, liquid spills, exposure to rain, drops).
- Battery Usage Caution: To prevent battery leakage, which can cause injury or damage, users must install batteries correctly, remove them when not in use for a long time, and avoid exposing them to excessive heat (sunshine, fire). The radio should not be exposed to dripping or splashing, and no liquid-filled objects or lighted candles should be placed on it.
- Notice on Modifications: Any unauthorized changes or modifications may void the user's authority to operate the product.
- Declaration of Conformity: The product complies with the essential requirements of Directive 2014/53/EU and radio interference requirements of the European Community. The Declaration of Conformity can be found on www.philips.com/support.
- Environmental Information: The product is designed with high-quality recyclable materials. A crossed-out wheeled bin symbol indicates that the product and its rechargeable batteries should not be discarded as household waste but delivered to appropriate collection facilities for recycling, following local rules. This helps prevent negative consequences for the environment and human health.
The manual also encourages users to register their product and get support at www.philips.com/support. The product information is subject to change without prior notice. The warranty is maintained by MMD Hong Kong Holding Limited.
General
To Next Page
