EN10
6 Other features
Play audio through Bluetooth
1
Press SOURCE repeatedly to select
[Bluetooth] mode.
[Not Connected] flashes on the display
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices.
3
Select [Philips R5505] from search results
and tap to connect
After successful connection, the screen
message will change to [Connected].
R
Use menu in Bluetooth mode
1
In Bluetooth mode, press and hold to
access Bluetooth menu.
2
Press to scroll through the
menu options:
t [Kitchen Timer]: set kitchen timer
t [Scan setting]: select the scan sensitivity
(strong station only or all station)
t [Sleep]: set sleep timer
t [Clock]: set time/date, select 12/24
hour and set time synchronization
t [Backlight]: adjust backlight settings
(3 options: Time out/ On level/ Dim
level)
t [System]: adjust system settings:
t [Language]: set system language
(Engish/ Deutsch/ Italiano/ Francais/
Nederlands/ Norwegian)
t [Factory Reset]: reset the unit
t [SW version]: view software
version
3
To select an option, press button.
4
Repeat steps 2 to 3 if any sub-option is
available under one option.
t To return to the previous menu, press
.
Note
t If no button is pressed within 15 seconds, the
menu exits.
Kitchen Timer
You can set a time period after which the
product buzzes.
1
Select [Kitchen Timer] under menu
The hour digits blink.
2
Press repeatedly to set the
hour; and then press
to confirm.
The minute digits blink.
3
Press repeatedly to set the
minute, and then press
to confirm.
The second digits blink.
4
Press repeatedly to set the
second, and then press
to confirm.
t To stop the buzzer, press any key on
the unit.
To Next Page
Loading...
