27
Settings
Table of contents
8 Settings
Press and hold the a/MENU key for two seconds while the device is
stopped (start-up screen) to enter the Settings menu..
Note
• Press the ~ key at the end of an operation to return to stop
mode. Press the ~ key during the operation to cancel the
operation without saving and return to stop mode.
8.1 Recording settings
8.1.1 Set file location
The display shows a folder icon which indicates where the recordings
are currently being stored: u, v, w, x–internal memory, à, á, â,
ã–memory card.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu ×.
3
Press h / b to select the function Memory select.
4
Press the record key, g, to confirm.
5
Press h / b, to select if you want to save the files in the internal
memory or on the microSD card.
6
Press the record key, g, to confirm.
7
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and
return to stop mode.
8.1.2 Setting recording quality
Use the recording quality settings to set the file format and the quality
of the recording as the data rate (bit rate). The higher the recording
quality the bigger the file and the less recordings you can create.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the recording settings menu Ó.
3
Press h / b to select the function Quality settings.
4
Press the record key, g, to confirm.
To Next Page
Loading...
