32 Settings
Table of contents
8.1.9 Enable/disable the recording indicator
This function allows you to switch o the status LED.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu ×.
3
Press h / b to select the function Record lamp.
4
Press the record key, g, to confirm.
5
Press h / b, to select whether you want to turn the status LED
on or o.
6
Press the record key, g, to confirm.
7
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and
return to stop mode.
8.2 Display settings
8.2.1 Select language
Note
• Your language might not be available. Select an alternative one.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu Ô.
3
Press h / b to select the function Language.
4
Press the record key, g, to confirm.
5
Press h / b to select the required display language.
6
Press the record key, g, to confirm.
7
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and
return to stop mode.
To Next Page
Loading...
