4. Recording
Record a le
NOTE
• Be careful not to cover the microphones while
recording. This might result in a lower recording
quality.
• If the recording time of your current recording
exceeds the available storage capacity, the re-
cording will stop. In this case, delete les from
your device to make more storage available.
Before you start recording
• Make sure your device has enough battery power left.
When your battery is almost discharged, you will see a
battery low icon .
X The device will turn o and your current recording will
automatically be saved.
• First select the folder you want your recording to be
saved in. For more information, see Start a new recording
[10]. You can store 100 les in each of the folders A, B, C,
and D.
If one of the folders is full, your subsequent recordings
will automatically be stored in the next folder.
• We recommend that you make a test recording in order to
nd the most suitable presets for your recording and ach-
ieve the best recording results.
Start a new recording
1. In stop mode, press the Left function button
to start
a new recording.
X The new le mode screen is displayed.
2. Press the Right function button to open the settings
panel .
To select a folder for your recording to be saved in:
• Press the Up/Down buttons to navigate to Folder and
then press the Record button to conrm your selec-
tion.
• Press the Up/Down buttons to navigate to the folder
you want your new recording to be saved in and then
press the Record button to conrm your selection.
• To return to the stop mode screen, press the Back
button.
To adjust the settings for your recording:
• Press the Up/Down buttons to navigate to your de-
sired setting and then press the Record button to
conrm your selection.
• To return to the stop mode screen, press the Back
button.
3. Press the Record button to start recording.
X The recording screen is displayed.
X The Record/Status LED illuminates red.
4. Press the Record button again to stop recording.
X The recording is saved to the preselected folder.
Edit a le
You can edit existing recordings in stop mode by appending
or overwriting a recording.
Append: Add additional recording parts at the end of an ex-
isting recording.
Overwrite: Overwrite an existing recording part starting
from any point within the recording.
To append a recording part:
In stop mode of an existing le, press the Record button.
• If the cursor of the audio progress bar is at the end of the
recording:
X The recording screen is displayed and a new recording
part is added at the end of your le.
• If the cursor of the audio progress bar is at the beginning
of the recording:
X The editing panel opens.
X Press the Up/Down buttons to select Append and then
press the Record button to conrm your selection.
X The recording screen is displayed and a new recording
part is added at the end of your le.
To overwrite a recording part:
1. In playback mode, press the Play/Stop button to stop
playback at your desired part.
2. Press the Record button.
X The editing panel opens.
3. Press the Up/Down buttons to select Overwrite and
then press the Record button to conrm your selection.
X The recording screen is displayed and a new record-
ing starts from where you stopped playback.
TIP
If you always want to either append or overwrite
a recording part and don't want the editing panel
to open each time, press the Right function but-
ton to open the settings panel . Press the Down
button to navigate to Edit mode and then select
Append or Overwrite.
10
To Next Page
Loading...
Need help?
General
