Philips VR175/05 - Automatic Channel Installation; Setting the Clock and Date

5
Autoinstall
The video recorder will search for all TV programmes. It
stores TV programmes found in the following sequence:
BBC 1, BBC2, ITV, CH 4, CH 5, SKY, others.
1 Press the
AUTOINSTALL
button on the videorecorder. If TV
channels have already been stored, select and confirm
the ’AUTOINSTALL’ line.
2 ’AUTOINSTALL’ starts.
AUTOINSTALL 00
3 Wait until all TV channels have been found. This can take
several minutes.
4 Autoinstall is now complete. Date and clock information
have been set.
If the clock time flashes in the display (e.g.:’20:00), read on in
the next section from step 3onward.
How to search for a TV channel manually, you read in
chapter 4 ’SPECIAL FEATURES’, the section about ’Manual
channel search’.
Note:
* If a TV channel transmits a ’TV channel name’ (e.g.
’BBC1’ ), it appears in the display.
Setting the clock
If a television programme which transmits TXT/PDC is stored
with programme number ’P 01’ , time (from TXT) and date
(from PDC) will automatically be taken from the TXT/PDC
information.
1 Press the
AUTOINSTALL
button on the videorecorder.
2 Confirm the line ’CLOCK’ with the
OK
button.
3 Adjust ’TIME’ with the
P q
,
P r
or with the numeric
buttons
0-9
.
4 Confirm the correct ’TIME’ with the
OK
buttton.
5 Repeat step 3und 4with ’YEAR’ , ’MONTH’ and ’DATE’
if required.
4 Confirm each correct entry with the
OK
button.