EasyManua.ls Logo

Philips VR685 - Playback Functions; Basic Playback, Search, and Eject

Philips VR685
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Insert the cassette into the cassette slot. v appears in
the display.
2 Playback: Press the playback button PLAY G .
3 Picture scanning: Press the H (reverse) or I (for-
ward) button once or several times. You have a choice of
several picture scanning speeds.
4 Interrupt: Press the STOP h button.
5 Wind and rewind: Interrupt the playback function with the
STOP h button and press the H (rewind) or I
(wind) button. In the display appears:
0:20
If, during wind/rewind, you want to have a quick access to
picture scanning, use the ’Instant View’ function.
6 Instant View: If you hold the H (rewind) or I (wind)
button during wind or rewind, you will switch to picture
scanning. If you release the button, the video recorder will
automatically switch back to rewind or wind again.
7 Eject a cassette: Interrupt the playback function with the
STOP h button and press the STOP/EJECT ? button on
the video recorder.
Notes: Some functions switch off automatically after a while
(e.g.: pause, still picture, picture scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
* The picture quality will deteriorate during picture scan-
ning. The sound is turned off.
* With this video recorder you can playback cassettes that
have been recorded on other video recorders in the NTSC
standard. This only works for PAL-television sets which are
suitable for a picture frequency of 60 Hz.
During NTSC-playback some special features
(e.g. still picture) are not possible.
Still picture/Slow motion
1 Press the STILL R button. A still picture appears on the
screen.
2 Each time you press STILL R again the picture will move
on one step.
3 Hold the STILL R button. The picture will be played in
slow motion.
4 Press the I button several times. You have a choice of
several playback speeds. When you press the H but-
ton several times you will return to the still picture.
There is no sound during slow motion playback.
Note: If the still picture vibrates vertically, hold the P r or
the P q button at step 1 until the vibration is minimal.
This setting will be stored automatically.
Please note, however, that interference may still occur with
poor quality cassettes.
2. PLAYBACK FUNCTIONS
8

Related product manuals