Philips X Series - 8. Pixel Defect Policy; 8.1. Pixels and Sub-Pixels; 8.2. Types of Pixel Defects + Dot Definition; 8.3. Bright Dot Defects

55BDL3207X
38
55 576p
ITU-R BT.1358, CEA-861-F Formats
17 & 18
31.250 50.000
56 1080i SMPTE 274M, CEA-861-F Format 20 28.125 50.000
57 1080i SMPTE 274M, CEA-861-F Format 5 33.750 60.000
58 720p SMPTE 296M, CEA-861-F Format 19 37.500 50.000
59 720p SMPTE 296M, CEA-861-F Format 4 45.000 60.000
60 1080p SMPTE 274M, CEA-861-F Format 32 27.000 24.000
61 1080p SMPTE 274M, CEA-861-F Format 33 28.125 25.000
62 1080p SMPTE 274M, CEA-861-F Format 34 33.750 30.000
63 1080p SMPTE 274M, CEA-861-F Format 31 56.250 50.000
64 1080p SMPTE 274M, CEA-861-F Format 16 67.500 60.000
65 3840x2160
CEA-861-F Format 93, HDMI 1.4b
VIC 1
54.000 24.000 VGA is not supported
66 3840x2160
CEA-861-F Format 94, HDMI 1.4b
VIC 2
56.250 25.000 VGA is not supported
67 3840x2160
CEA-861-F Format 95, HDMI 1.4b
VIC 3
67.500 30.000 VGA is not supported
68 3840x2160
CEA-861-F Format 96, 4:2:0 sub-
sampling
67.500 50.000 VGA is not supported
69 3840x2160 CEA-861-F Format 96 112.500 50.000 VGA is not supported
70 3840x2160
CEA-861-F Format 97, 4:2:0 sub-
sampling
67.500 60.000 VGA is not supported
71 3840x2160 CEA-861-F Format 97 135.000 60.000 VGA is not supported
72 4096x2160 CEA-861-F Format 98 54.000 24.000 VGA is not supported
73 4096x2160 CEA-861-F Format 99 56.250 25.000 VGA is not supported
74 4096x2160 CEA-861-F Format 100 67.500 30.000 VGA is not supported
• The PC text quality is optimum in HD 1080 mode (1920 x 1080, 60Hz).
• Your PC display screen might appear dierent depending on the manufacturer (and your particular version of Windows).
• Check your PC instruction book for information about connecting your PC to a display.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases,
abnormal signals (such as stripes) might appear on the screen when the PC power is turned o (or if the PC is disconnected). If
so, press the [INPUT] button to enter the video mode. Also, make sure that the PC is connected.
• When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.
• The display settings table complies to the IBM/VESA standards, and based on the analog input.
• The DVI support mode is regarded as same to the PC support mode.
• The best timing for the vertical frequency to each mode is 60Hz.