Philips X600 - Stroke Input

18 Text and number entry
The general steps of using Pinyin input method are
as follows:
Enter the pinyin letters accordingly. Press once on
the key corresponding to the pinyin letter without
having to consider its position on the key. Pinyin
input method will automatically select and list all
possible combinations for you to select.
For example, to input the character
『王』, with the
Pinyin letters
『wang』, press 9 2 5 4 and use
> to select the desired pinyin combination for
『wang』 , then press , to confirm combination.
As soon as you have selected and entered a
character, the candidate list will be updated and a
list of association characters will be displayed. Press
< or > to select the desired association character
and press
, to confirm entry. This speeds up the
input process further.
When you have finished editing a name on the
phonebook or SMS, press
R to exit from
association character input mode and press
, to
confirm completion of the editing process.
Stroke input
Press * to select stroke input mode. The strokes
are represented on each key as follows:
1. Enter Pinyin letters 2 to 9
R
to clear
2. Select Pinyin combination < or >
3. Confirm Pinyin combination ,
4. Select from candidate list < or > / + or -
(scroll list)
5. Confirm selection ,
6. Select and enter association character, or return
to step 1 to enter new words.
7. Or press
R to exit from association character
input mode, then press
, to complete. the editing.