USER MANUAL – Arrow QG™/VI™
© 2022 Phillips Connect LLC Arrow QG/VI User Manual Page 2 of 10
1. INTRODUCTION
The Arrow QG™ (Arrow VI™) from Phillips Connect Technologies is a vehicle tracking device that
combines GPS location with LTE and Bluetooth. Arrow products monitor vehicle functions and collect
data for tracking and analysis.
The Arrow QG (Arrow VI) appears to the user or a server application as a single endpoint device. It can
be queried, updated, and configured either through a serial connection or an over-the air (OTA) LTE IP
connection. The Arrow QG (Arrow VI) presents itself over the connections as an enhanced cellular
modem with attached functional elements. These elements include:
• GPS location engine
• General Purpose Bidirectional I/O (GPIO) pins
• Relay drive pin output
• Serial UART port
• CAN Communication (optional)
• BLE 5.0
The following is a typical application scenario:
To Next Page
