We do not recommend that you change the settings If your eBike works
well. Changing the settings may cause your eBike to stop working
properly. If your eBike doesn't work properly after you change the
settings, please return to the default settings. Philodo may change the
default value in production without notice. If you need any help, please
contact us.
Strength of PAS mode. When set
to higher numbers, the motor
will come on stronger. On lower
numbers, it will be more gentle.
Types of
PAS
Sensor
Magnetic
steel
Types of PAS Sensor Magnetic
steel.
Controller
current
limit
value
Not open to users. The
modification is invalid.
Controller
undervolt
age value
The controller will shut down when
the voltage is lower than 39.0V.
Hold the plus button for 5 second
to reset the Odometer. In some
production batches, P17
represents this function.
To Next Page
Loading...
