Swimming pool heat pump
- 31 -
Operation Instruction
a) On-off operation
When the unit is on, press "on/off" key for 0.5 seconds to start it up;
When the unit is off, press "on/off" key for 0.5 seconds to shut it down.
b) Mode selection
The unit has three operation modes:
Cooling mode, Heating mode, Auto heat pump mode.
When parameter "H01=0", there is only "cooling mode" to choose;
When parameter "H01=1", Press “mode” can select modes of heating, cooling, automatic;
When parameter "H01=2", there is only "heating mode" to choose.
Cooing mode Heating mode Automatic mode
To Next Page
Loading...