What to do if PHNIX PASRW015 has communication failure?
If your PHNIX Water Pump experiences communication failure between the wire controller and the main board, the likely cause is a connection issue. You should check the connection between the wire controller and the main board to resolve this.
What to do if PHNIX Water Pump shows high pressure protection?
If the PHNIX Water Pump triggers high pressure protection (HP), the HP switch might be broken. To resolve this, check or change the HP switch.
What to do if PHNIX PASRW015 Water Pump shows low pressure protection?
If the PHNIX Water Pump triggers low pressure protection (LP), it might be due to a broken LP switch. You should check or change the LP switch.
Why does my PHNIX Water Pump have antifreezing protection?
If the PHNIX Water Pump activates antifreezing protection, it's likely because the antifreezing temperature is below 2 degrees. In this case, check the flow and water system.
What causes water flow protection in PHNIX Water Pump?
If your PHNIX Water Pump indicates a water flow protection issue, the flow switch may be broken. You should check or change it.
How to fix water inlet temp sensor failure in PHNIX PASRW015 Water Pump?
If the PHNIX Water Pump reports a water inlet temperature sensor failure, the temperature sensor is likely broken. You should check or change it.
How to fix water outlet temp sensor failure in PHNIX Water Pump?
If the PHNIX Water Pump indicates a water outlet temperature sensor failure, the temperature sensor is probably broken. You should check or change it.
How to fix ambient temp sensor failure in PHNIX PASRW015?
If the PHNIX Water Pump shows an ambient temperature sensor failure, the temperature sensor is likely broken. You should check or change it.
How to fix coil temp sensor failure in PHNIX PASRW015 Water Pump?
If your PHNIX Water Pump displays a coil temperature sensor failure, the temperature sensor is likely broken. You should check or change it.
How to fix suction temp sensor 1 failure in PHNIX PASRW015?
If your PHNIX Water Pump indicates a suction temperature sensor 1 failure, the temperature sensor is likely broken. You should check or change it.
General| Brand | PHNIX |
|---|---|
| Model | PASRW015 |
| Category | Water Pump |
| Language | English |
Introduction to the manual and its purpose for users.
Overview of PHNIX swimming pool heat pump features and benefits.
Explanation of product model naming conventions and coding.
Detailed explanation of how the heat pump works.
Highlights of the heat pump's advantages like durability and efficiency.
Detailed technical data and performance metrics for various models.
Graphical representation of heat pump performance under varying conditions.
Physical dimensions of different heat pump models.
Detailed explanation of key components like the heat exchanger.
Essential warnings and precautions for safe installation.
Guidelines for safely moving and handling the unit.
Steps for safely unpacking the unit and checking contents.
Requirements for installation site, space, and general setup.
Instructions for connecting the water piping system.
Guidance on connecting the unit's electrical components and diagrams.
Steps to follow for the initial startup and testing of the unit.
Importance and methods of insulating swimming pools for efficiency.
Explanation of the controller's interface and buttons.
Meaning of various symbols shown on the controller display.
How to select and use different operating modes (Cooling, Heating, Auto).
Instructions for setting the desired water temperature.
Guide to accessing and modifying user and factory parameters.
Procedure for locking and unlocking the controller keypad.
How to set the clock and program timer functions.
Procedure for uploading or downloading unit settings.
Explanation of the connections on the Printed Circuit Board.
Common faults, reasons, and solutions for unit malfunctions.
Detailed list and description of all adjustable parameters.
Configuration options for the Electronic Expansion Valve.
Adjusting fan speed based on temperature conditions.
Parameters related to system modes, water pump, and temperature settings.
Resistance-Temperature table for NTC thermistors.
To Next Page
