Need help?Do you have a question about the Phoenix Contact EMpro EEM-MA371 and is the answer not in the manual?
General| Product type | Energy meter |
|---|---|
| Type | EMpro EEM-MA371 |
| Mounting type | DIN rail mounting |
| Measurement category | CAT III |
| Frequency range | 45 - 65 Hz |
| Protection class | IP20 |
| Housing material | Plastic |
| Communication Interface | Modbus RTU |
| Number of phases | 3-phase |
| Connection | Screw terminal |
Lists critical safety measures for installation, operation, and maintenance.
Essential safety warnings and general installation steps to prevent hazards.
Step-by-step initial setup using the device's buttons and display.
Initial setup process using the integrated web interface.
Securing device access by managing PINs and passwords.
Accessing and understanding energy measurement data from various meters.
Setting up data logging and performing firmware updates.
Information on the Ethernet interface, RJ45 socket, and IP configuration.
Details Modbus protocol, function codes, RTU, TCP, and gateway modes.
Steps for integrating PROFINET, including GSDML files and hardware.
To Next Page
