Need help?Do you have a question about the Phoenix Contact EMpro EEM-MA370 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Protection Class | IP20 |
| Measurement category | CAT III |
| Current measurement range | 1 A ... 5 A |
| Frequency measurement range | 45 Hz ... 65 Hz |
| Communication Interface | Modbus RTU |
| Mounting type | DIN rail |
| Supply voltage | 100-240 V AC |
| Connection type | Screw connection |
| Storage temperature range | -20°C to +70°C |
Explains symbols and signal words for hazard identification.
Defines the necessary qualifications for operating the device safely.
Specifies the intended use and environmental conditions for the EMpro devices.
Lists essential safety precautions and warnings for installation and operation.
Provides a general introduction to the EMpro energy measuring devices and their features.
Details the procedure for physically attaching the device to a DIN rail.
Outlines crucial steps and warnings for installing the EMpro energy measuring devices.
Describes the components and indicators for devices with an LC display.
Details the indicators and controls for devices without an LC display.
Explains indicators and controls for devices with PROFINET communication.
Describes indicators and controls for devices with Ethernet/IP communication.
Provides specifications for the device's LCD display technology and features.
Explains the icons used on the display to indicate device events and states.
Defines the function of each softkey and navigation button on the device display.
Guides users through the initial setup using the device's on-screen interface.
Details the initial device setup process using the integrated web server interface.
Illustrates the hierarchical menu organization accessible directly on the device display.
Shows the menu layout and navigation options available through the web server interface.
Explains how to choose the display language for the device and web server.
Covers reading, setting, and synchronizing the device's date and time.
Details configuration of contrast, brightness, and backlight for the device display.
Explains display format, alarm light, and refresh time settings.
Describes how to modify display settings using the integrated web server interface.
Describes how to access and interpret essential device identification and version details.
Explains the procedure and consequences of performing a factory reset on the device.
Covers managing user access, PINs, and passwords for device security.
Details exporting, importing, and directly transferring device configuration settings.
Explains how to access and interpret various energy metering data from the device.
Covers generating and analyzing statistical data, including average values.
Describes the capabilities of the digital input, such as impulse counting and tariff selection.
Explains the configuration and behavior of the device's digital output.
Details how to configure and manage different tariff settings for energy measurement.
Explains how to configure logic gates for complex alarm conditions using digital outputs.
Covers setting up and managing data logging parameters for recording measurements over time.
Guides users through updating the device's firmware to the latest version.
Details Ethernet interface setup, IP addressing, and configuration parameters.
Explains Modbus/RTU protocol, topology, and parameter settings for RS-485.
Covers Modbus/TCP protocol, server operation, and gateway functionality.
Covers software requirements, GSDML file integration, and hardware setup for PROFINET.
Describes the various data types and register formats used in Modbus communication.
Explains the structure and meaning of columns within the device's register table.
Provides an overview of the device's electrical and environmental specifications.
Lists the physical dimensions and conductor cross-section requirements for connections.
Details insulation types, overvoltage categories, and test voltages for safety compliance.
A reference list of all figures included in the manual.
A reference list of all tables included in the manual.
An alphabetical index to help locate specific topics within the document.
To Next Page
