Phoenix Contact EMpro EEM-MA370 User Manual

EMpro - multifunctional energy measuring devices for DIN rail mounting
126 / 196
PHOENIX CONTACT 109357_en_00
If one of the alarms is active, this signal output is reset.
OR operator
Figure 10-28 Logic gate with OR operator
When one of the alarms is active, the signal output is set.
If none of the alarms are active, this signal output is reset.
NOR operator
Figure 10-29 Logic gate with NOR operator
When none of the alarms are active, this signal output is set.
If one of the alarms is active, this signal output is reset.
XOR operator
Figure 10-30 Logic gate with XOR operator
If an alarm is active, this signal output is set.
If none or several of the alarms are active, this signal output is reset.

Phoenix Contact EMpro EEM-MA370 Specifications

General

Display	LCD
Protection Class	IP20
Measurement category	CAT III
Current measurement range	1 A ... 5 A
Frequency measurement range	45 Hz ... 65 Hz
Communication Interface	Modbus RTU
Mounting type	DIN rail
Supply voltage	100-240 V AC
Connection type	Screw connection
Storage temperature range	-20°C to +70°C