Need help?Do you have a question about the Phoenix Contact ILC 130 ETH and is the answer not in the manual?
General| Communication | Ethernet |
|---|---|
| Number of Digital Inputs | 8 |
| Number of Digital Outputs | 4 |
| Power Supply | 24 V DC |
| Digital Output Type | Transistor |
| Mounting Type | DIN Rail |
| Ethernet Ports | 1 |
| Analog Inputs | 0 |
| Analog Outputs | 0 |
| Programming Software | PC WORX |
| Operating Temperature | -25°C ... 55°C |
| Interfaces | Ethernet |
| Protocols Supported | Modbus TCP |
| Communication Protocols | Modbus TCP, PROFINET |
Explains the manual's goal and lists necessary hardware and software for Inline Controllers.
Provides an overview of the controller, its interfaces (Ethernet, INTERBUS, V.24), and application fields.
Provides critical safety notes and requirements for using specific Inline Controllers in zone 2 hazardous areas.
Identifies and describes the physical ports and controls on the Inline Controller.
Explains the meaning of various LEDs and indicators for quick local error diagnostics.
Provides detailed instructions for installing and uninstalling the Inline Controller from the DIN rail.
Outlines the available Ethernet and serial PRG interfaces for communication with the controller.
Details the INTERBUS system, including local and remote bus configurations and limitations.
Guides on selecting appropriate power supplies, considering fall-back characteristics and inrush current.
Provides instructions for connecting the 24 V DC power supply to the Inline Controller.
Details the configuration and assignment of digital inputs (I1-I8) and outputs (Q1-Q4).
Explains how to assign IP addresses using BootP server or PC connection for network access.
Lists system variables for reading the controller's operating and error states.
Outlines tests and criteria for electromagnetic compatibility (EMC) and noise emissions.
Provides a table of common errors, their causes, and suggested remedies for troubleshooting.
To Next Page