Need help?Do you have a question about the Phoenix Contact AXC F 3152 and is the answer not in the manual?
General| Ethernet Ports | 2 |
|---|---|
| USB Ports | 2 |
| Operating System | Linux |
| Supply voltage | 24 V DC |
| Interface | Ethernet, USB |
| Installation position | DIN rail |
| Degree of protection | IP20 |
| Power Supply | 24 V DC |
| Product Type | Programmable Controller |
| Controller Type | PLC |
| CPU | ARM Cortex A8 |
| Flash Memory | 512 MB |
| Operating Temperature | -25 °C ... 60 °C |
Addresses risks of unauthorized network access and security measures.
Details conditions and approvals for using the controller in explosive areas.
Overview of controllers, features, Axioline F, Inline stations, programming, and PROFINET.
Details the various components and elements of the controller.
Explains the purpose and meaning of diagnostic and status LEDs.
Describes the reset button and its function for restarting and resetting.
General information on selecting and connecting the power supply.
Steps to download and install the PLCnext Engineer software.
Overview of the PLCnext Engineer user interface and its main areas.
Introduction to configuring IP settings for the controller.
Steps to connect PLCnext Engineer to the controller via the network.
Safety precautions for removing modules, including ESD and tilting.
Steps and considerations for replacing a controller.
Procedure for sending defective devices for repair or replacement.
Lists order numbers and quantities for controllers and accessories.
Provides dimensions, general data, and ambient conditions for AXC F 1152/2152.
Provides dimensions, general data, and ambient conditions for AXC F 3152.
Instructions for updating firmware using the shell.
To Next Page
